M4 Medical Mattress

*NEW* High risk mattress

The M4 mattress is a high risk profiling static mattress that is great for transfers and reduces roll out.
Featuring the unique ActiveGel temperature responding material.
The mattress is designed with a section of v-cut XP Support Foam which creates additional air movement for enhanced pressure relieving properties.


This rating is based on our average peak pressure of <20mmHg. For more information refer to the Icare pressure care manual.

Icare risk category ratings are based on average peak pressure, Therapist recommendation, case studies, industry comparison and the Waterlow scale. For some high risk clients Icare Zerotec covers are recommended. The best way to assess a client on a pressure reducing surface is to monitor pressure points with visual checks over a period of 5 days.

ICM4

Long Single
Code: ICM4LS
Mattress Size: 2030 x 900mm

ICM4

King Single
Code: ICM4KS
Mattress Size: 2030 x 1070mm

ICM4

Long Double
Code: ICM4LD
Mattress Size: 2030 x 1350mm

ICM4

Queen
Code: ICM4Q
Mattress Size: 2030 x 1520mm

SWL Minimum 30kg
SWL Maximum 215kg

10 Years Warranty

150mm Depth

» No turn design reducing manual handling
» Anticrease XP Support base to allow easy contour for any profiling bed
» Standard cover MVTR: NA. Medical Cover MVTR (g/24h·m2): 1635.0 Average
» Medical Cover BS7177: Crib 5
» Waterlow ≤20
» To launder the cover in a washing machine, set the main wash to a minimum of 65°C for no less than 10 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60°C. The foam can be autoclaved at 134°C.

Pressure Redistribution

ActiveGEL material is a high grade of elastic type foam infused with cooling gel partials. This material is responsive to temperature and will become softer as it becomes warmer. So around a pressure point it will always soften and allow the blood to circulate freely. The Gel infusion helps to regulate overall temperature.

Castellated ActiveGEL

The ActiveGEL is module cut to allow each square to move to body contour. This module cutting also allows for horizontal anti shear movement.

Base & Rail Support Foam

XP Support base layer features deep cut springs allowing much more airflow and extension of lateral contouring. XP Support foam is an open cell material that breaths to allow air circulation but is high density to prevent bottoming out or side roll out. This material will easily contour to any profiling bed.

Zerotec Cover

Zerotec fabric is a medical barrier fabric that has high elasticity in every direction which reduces shear on pressure redistribution surfaces. It is waterproof and wipeable but has microporous breathable properties. This is used for the cover of the M4 mattress. This cover has welded seams and waterfall flaps for fluid control.

Available In

Long Single, King Single, Long Double and Queen




ActiveGEL

The new pressure relieving ActiveGEL helps

to regulate temperature with tiny

gel particles infused throughout the material.

Other Products