M2 Medical Mattress
High risk medical mattress
The M2 mattress features firm edge support and high density foams. This is a high risk mattress, and suitable for the use on all Icare beds.
The M2 Medical Mattress has a wipeable cover with drip cover and firm edge support.
This rating is based on our average peak pressure of <20mmHg. For more information refer to the Icare pressure care manual.
Icare risk category ratings are based on average peak pressure, Therapist recommendation, case studies, industry comparison and the Waterlow scale. For some high risk clients Icare Zerotec covers are recommended. The best way to assess a client on a pressure reducing surface is to monitor pressure points with visual checks over a period of 5 days.
Mattress Size: 2030 x 900
Mattress Size: 2030 x 1070
Mattress Size: 2030 x 1350
Mattress Size: 2030 x 1520
150mm Mattress Depth
SWL Minimum 30kg SWL Maximum 215kg
5 Year Warranty
» No turn design reducing manual handling
» Anticrease XP Support base to allow easy contour for any profiling bed
» Standard cover MVTR: NA. Medical Cover MVTR (g/24h·m2): 1635.0 Average
» Medical Cover BS7175: Crib 5
» Waterlow ≤20
» Immersion Rating: Medium
» Envelopment Score: 4/5
» To launder the cover in a washing machine, set the main wash to a minimum of 65°C for no less than 10 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60°C. The foam can be autoclaved at 134°C.
Pressure Redistribution XP Light foam is very responsive and microporous material allowing a high level of airflow. This is used in the top layer of the M2 mattress and is module cut to allow each square to move to body contour. This module cutting also allows for horizontal anti shear movement.
Base & Rail Support Foam XP Support foam is a high-density foam that is used in the bottom layer and side rails of the M2. XP Support foam is an open cell material that breaths to allow air circulation but is high density to prevent bottoming out or side roll out. This material will easily contour to any profiling bed.
Zerotec Cover Zerotec fabric is a medical barrier fabric that has high elasticity in every direction which reduces shear on pressure redistribution surfaces. It is waterproof and wipeable but has microporous breathable properties. This is used for the cover of the M2 mattress. This cover has welded seams and waterfall flaps for fluid control.
XP Light material is module cut to allow each square to move horizontally and vertically to reduce pressure and sheer.
All direction stretch
Long Single, King Single, Long Double and Queen